Mission Darkness BlockBox Touch

The Mission Darkness™ BlockBox Touch is a collapsible Faraday enclosure with a large interior space, built-in conductive glove and device preview. Designed specifically for law enforcement and military forensic investigators, the BlockBox Touch allows users to interrogate devices and access data at the point of seizure. The enclosure is easy to use, extremely high-shielding, and large enough to accommodate any size tablet or phone, plus accessories such as batteries or data extraction tools.

The BlockBox Touch side walls collapse, and the enclosure folds into a compact size and fits inside the included carrying case.

The Faraday chamber uses the patented NeoLok™ closure system, allowing an operator to effortlessly close the chamber by way of a double roll and strong neodymium magnetic seal holding the roll in place. A quick-snap strap over the roll provides extra security, which is especially useful if transporting shielded devices between locations, such as from the collection site to the lab. This type of closure is preferred for forensic use as the Faraday chamber can be easily opened with a glove. The magnetic closure increases the product’s overall longevity, compared to Faraday enclosures built with Velcro which can damage gloves and wear out with frequent use due to “hard pulling” on the closure area.

• Wide opening accommodates any size tablet, cell phone, or similar size device
• Collapses into a compact size and comes with a slim carrying case to hold the analysis enclosure and accessories
• Devices remain fully shielded during transport
• Made in the USA

RF Isolation & Shielding:

• TitanRF™ Faraday Fabric is certified by Keystone Compliance to MIL STD 188-125 (shields against High-altitude Electromagnetic Pulses) and IEEE 299-2006 (effectiveness of electromagnetic shielding)
• Blocks all RF signals including WiFi (2.4 to 5GHz), Bluetooth, Cellular (including 5G), GPS, RFID, NFC, and radio signals from low MHz to 40GHz, with ~90dB+ average attenuation
• Blocks carrier, hardware, and OS agnostics
• Shields against EMP, HEMP, CME, Solar Flares
• Blocks device hacking, tracking, remote wiping and remote detonation

Included in The Kit:

• Mission Darkness BlockBox Touch
• Slim carrying case with a handle and two interior zipper pockets
• Removable signal-dampening foam block (for increased shielding in high-signal-strength environments, also serves as a platform for analyzing or taking photos of devices inside)
• Stylus
• Usage instructions

Construction:

• The exterior is constructed of water-resistant Ballistic nylon
• The interior has two layers of high-shielding TitanRF™ Faraday Fabric on all sides with dual paired seam construction
• Padded side walls
• Patented NeoLok™ closure system consisting of a double roll with a magnetic seal, plus additional quick-snap closure strap
• Built-in double layer conductive glove
• Large transparent viewing window
• Closable transparent pocket on back to place organisation information
• Signal-dampening foam block

Dimensions:

• The kit can be transported in a backpack
• Internal usable dimensions: 17″ L x 13″ W x 6″ H (43.2cm x 33cm x 15.2cm)
• Carrying case: 11″ L x 14″ W x 2″ H (27.9cm x 35.6cm x 5.1cm) when packed with collapsed product and accessories

Usage Warning:  The Faraday fabric on the inside and the conductive gloves will become defective with extended water contact or any punctures – do not insert wet devices, or items with sharp edges inside the BlockBox. All Faraday fabrics wear out over time – the BlockBox and gloves should be regularly checked to ensure they continue to adequately shield.

If charging of devices is required, consider the BlockBox Touch USB which includes a USB filter and cable set.

Links to the videos on the BlockBox Touch are here:

• Mission Darkness BlockBox Touch and Touch USB Demo
• BBT Touch Promo

For more information about Mission Darkness™ products, visit our brand page.