TitanRF Faraday Fabric + D.I.Y. Shielded Enclosures
Frequently Asked Questions
How do I use this fabric to make my own enclosure for shielding electronic devices from radio frequency (RF) signals?
TitanRF Faraday Fabric can be cut, sewn, taped, and used like standard fabric. View the DIY instructional image for an example of how to build a RF shielded enclosure for a tablet or similar device.
TitanRF Faraday Fabric can be cut, sewn, taped, and used like standard fabric. View the DIY instructional image for an example of how to build a RF shielded enclosure for a tablet or similar device.
What RF signals does this fabric block?
It is 100% shielding of WiFi (2.4 & 5GHz), Bluetooth, cell signals including 5G networks, GPS, RFID, and radio signals with 80dB-100dB average attenuation. We recommend using multiple layers of the fabric for increased shielding.
It is 100% shielding of WiFi (2.4 & 5GHz), Bluetooth, cell signals including 5G networks, GPS, RFID, and radio signals with 80dB-100dB average attenuation. We recommend using multiple layers of the fabric for increased shielding.
Can you use this with a sewing machine?
Yes, you can use a sewing machine with our faraday fabric. We recommend using conductive thread and to also cover any holes/seams with our TitanRF Faraday Tape to prevent any performance loss.
Yes, you can use a sewing machine with our faraday fabric. We recommend using conductive thread and to also cover any holes/seams with our TitanRF Faraday Tape to prevent any performance loss.
Is this fabric washable?
We do not recommend machine washing the fabric. If you must clean, dampen a rag and lightly wipe away residue.
We do not recommend machine washing the fabric. If you must clean, dampen a rag and lightly wipe away residue.
What are the best practices for this fabric being used to line walls?
We recommend using multiple fabric layers on all walls and having the fabric touch on all sides/seams. Use TitanRF Faraday Patches to seal holes and TitanRF Faraday Tape to connect multiple sheets of fabric.
We recommend using multiple fabric layers on all walls and having the fabric touch on all sides/seams. Use TitanRF Faraday Patches to seal holes and TitanRF Faraday Tape to connect multiple sheets of fabric.
Can you use fabric adhesive on this for indoor construction projects?
If applying the fabric to walls, you can use a standard construction adhesive on the first layer to tack it to the wall, but not in excess or on seams. The second fabric layer should not have adhesive applied, and the fabric layers should overlay by an inch. We recommend using TitanRF Faraday Tape to seal the seams.
If applying the fabric to walls, you can use a standard construction adhesive on the first layer to tack it to the wall, but not in excess or on seams. The second fabric layer should not have adhesive applied, and the fabric layers should overlay by an inch. We recommend using TitanRF Faraday Tape to seal the seams.
Will it block airport scanners if I wrap it around an item?
No, this does not block x-ray. You need thick metal to do that.
No, this does not block x-ray. You need thick metal to do that.
Would mylar work just as well to shield an item?
No, the attenuation (the reduction of the amplitude of a signal) is much greater with our TitanRF Faraday Fabric compared to mylar. Mylar at best can provide an attenuation of around 20dB. Our TitanRF Faraday Fabric has a consistent attenuation of between 80dB and 100dB.
No, the attenuation (the reduction of the amplitude of a signal) is much greater with our TitanRF Faraday Fabric compared to mylar. Mylar at best can provide an attenuation of around 20dB. Our TitanRF Faraday Fabric has a consistent attenuation of between 80dB and 100dB.
I am looking to make a modem/router slipcover with this fabric. Will that block the WiFi signal that allows the router to function in the house?
If you cover the router ENTIRELY with the fabric, then it will block the signal. But, of course, your router won’t function after that. And by ENTIRELY, you must unplug everything and place the router inside of your cover, and roll the edges so there is a tight seal. If there is a cable protruding from inside the pouch to outside, it will not block. This is the same concept as our faraday bags.
If you cover the router ENTIRELY with the fabric, then it will block the signal. But, of course, your router won’t function after that. And by ENTIRELY, you must unplug everything and place the router inside of your cover, and roll the edges so there is a tight seal. If there is a cable protruding from inside the pouch to outside, it will not block. This is the same concept as our faraday bags.
Can I use this to shield a smart meter outside my house to reduce EMF?
We have many customers who purchase our fabric, tape, and patches for this exact purpose with positive results, however, it may be difficult to shield 100% EMF because the meter emitting the signal would not be completely covered.
We have many customers who purchase our fabric, tape, and patches for this exact purpose with positive results, however, it may be difficult to shield 100% EMF because the meter emitting the signal would not be completely covered.
Can this be used as a shielded blanket under my laptop computer to block radiation?
You can use the fabric as a blanket to reduce EMF, etc., although you should not make direct skin contact if you have allergies to nickel.
You can use the fabric as a blanket to reduce EMF, etc., although you should not make direct skin contact if you have allergies to nickel.
How do I know if my enclosure is properly blocking signals?
You can use the Mission Darkness app to test the signal blocking strength of faraday bags or DIY RF enclosures. It allows the user to perform a test using WiFi, cell, and Bluetooth signals to determine whether the faraday enclosure completely or only partially blocks signal transmission. Look for “Faraday Test” in the App Store or “MD Faraday Bag Tester” in Google Play.
You can use the Mission Darkness app to test the signal blocking strength of faraday bags or DIY RF enclosures. It allows the user to perform a test using WiFi, cell, and Bluetooth signals to determine whether the faraday enclosure completely or only partially blocks signal transmission. Look for “Faraday Test” in the App Store or “MD Faraday Bag Tester” in Google Play.
Question not answered? Feel free to email sales@custodi.co.nz with your TitanRF Faraday Fabric + D.I.Y. shielded enclosure question.
