Mission Darkness DroneCloak

The Mission Darkness™ DroneCloak is a dome-shaped Faraday cover for rapid containment of disabled hostile drones. Once a drone has been brought down by a scrambler or other countermeasure, the DroneCloak can be deployed from a distance of 3 to 4.5m to quickly isolate the device from all RF signals – blocking remote control signals, data access and any onboard weapon activation. The system is lightweight, packable and designed for use by military, law enforcement and first responder teams.

An extendable pneumatic pole carries the cover into position over the downed drone, and full deployment takes less than 10 seconds. When draped over the drone, the cloak establishes a conductive shield that suppresses radio, cellular, GPS, Wi-Fi, Bluetooth, and telemetry signals, effectively disconnecting all command, video, and remote-trigger functions while inspection of the drone takes place.

Note: The DroneCloak is a drape-style shield rather than a fully sealed Faraday enclosure. Designed for rapid field use, the cloak significantly attenuates control and downlink signals and is effective in typical downed-drone scenarios. For full-seal RF isolation of recovered electronics, pair the DroneCloak with the Mission Darkness™ Recon Faraday Drone Shield or similar products.

Commonly Used to Shield:

• Downed or captured drones (UAVs, quadcopters, fixed-wing models) after they’ve been disabled or scrambled
• Drone control and telemetry antennas, reducing remote command, GPS, and video transmission
• Onboard cameras, GPS modules, and communication systems to limit live data streaming
• Explosive trigger circuits or remote activation devices, minimizing signal exposure
• Suspect payloads or electronics awaiting inspection by bomb squad or forensic teams
• Short-term containment of RF-emitting devices when full enclosure shielding is not required

Applications:

• Law Enforcement Operations:  RF isolation of seized or downed UAVs to prevent remote data access or command
• Military and Tactical Response:  field-deployable signal suppression for hostile, surveillance, or unidentified drones
• Explosive Ordnance Disposal:  safe containment of drones with suspected explosive or remote-triggered payloads
• Digital Forensics & Intelligence Collection:  preservation of onboard data and prevention of remote wipe or transmission
• Critical Infrastructure Security:  rapid deployment to neutralize drone threats near airports, power plants, or sensitive facilities
• Counter-UAS and Private Security Operations:  portable solution for controlled drone recovery and transport

Operational Workflow:

1. Identify and disable – hostile drone is identified and brought down using a drone scrambler or other countermeasure
2. Deploy from safety – operator extends the pneumatic pole and places the DroneCloak over the downed drone from 3 to 4.5m away
3. Secure and isolate – once covered, the drone is RF-inert and safe to approach, inspect or remove

RF Isolation & Shielding:

• Lab tested to military-grade electromagnetic shielding standard GJB 8820 (equivalent to IEEE-299-2006)
• Blocks all RF signals including WiFi (2.4 to 5GHz), Bluetooth, Cellular (including 5G), GPS, RFID, NFC, and radio signals from low MHz to 40GHz, with ~90dB+ average attenuation
• Shields against EMP, HEMP, CME, Solar Flares
• Blocks device hacking, tracking, remote wiping and remote detonation

Key Features:

• High Shielding:  built with multiple layers of high-shielding TitanRF™ Flex Faraday Fabric designed for repeated operational use
• Rapid Deployment:  deploy in under 10 seconds to quickly neutralize and secure downed drones
• Safe Standoff Operation:  includes a telescoping pneumatic pole (extends 3 to 4.5m  for placing the cloak over a drone from a safe distance
• Deployment Straps:  integrated webbing straps interface with the pole hook, allowing operators to accurately position and secure the DroneCloak over the target
• Quick-Release Hook:  hook design enables rapid release and retrieval once the DroneCloak is in place, maintaining safe standoff distance throughout the process
• Effective Signal Suppression:  drape-style conductive shield significantly reduces control, telemetry, and video signals, preventing remote access or activation
• Lightweight & Portable:  lightweight, compact and field-portable for grab-and-go drone-containment workflows
• 1 Year Warranty

Dimensions:

• DroneCloak exterior radius: 54″ (137.16cm) round
• DroneCloak fabric coverage height (loose fabric to cover bulky items): 20″ (50.8cm)
• Pole minimum length: 44.25″ (112.4cm)
• Pole maximum length: 132.5″ (336.55cm)

The Kit Includes:

• DroneCloak with attached deployement straps
• Extendable deployment pneumatic pole
• Carrying case with backpack straps that fits collapsed DroneCloak, deployment pole, and accessories
• Usage instructions

Folding Instructions:

The DroneCloak features a flexible frame that allows it to collapse in the same way as a car windshield sunshade. To fold, simply grasp opposite edges and twist the frame into overlapping loops, reducing the full-size dome into a compact circular shape. Once folded, the cloak fits neatly inside the included carrying case, making it easy to store, transport, and deploy in the field. This design keeps the system lightweight and portable without sacrificing deployment speed or shielding performance.

The Mission Darkness™ Drone Shielding Range:

1. Recon Faraday Drone Shield – Faraday protection for drones and UAVs
2. Drone Ops Rapid Cinch – field deployable RF isolation for drone forensics and live analysis
3. DroneCloak – rapid deployment Faraday shield for drone signal neutralisation
4. For other Faraday products that can be used to shield drones, watch the video Best Faraday Bags For Drones! Mission Darkness™

Usage Warning: The DroneCloak’s shielding effectiveness can be compromised by punctures, tears, or extended exposure to moisture. Do not pierce, cut, or place sharp or heated objects on the fabric. Avoid using the cloak on wet surfaces or in heavy rain, and always inspect the material for damage before and after each deployment.

For more information about Mission Darkness™ products, visit our brand page.