Mission Darkness BlockBox Touch
POA
The Mission Darkness BlockBox Touch is a portable Military-grade soft-sided analysis enclosure designed for law enforcement forensic investigators and armed services to operate and interrogate devices at any location while shielded from RF signals. Features built-in conductive glove, viewing window and large interior space. Designed specifically for law enforcement and military forensic investigators. Certified to MIL STD 188-125 and IEEE 299-2006.
Available to Order
Get a Quote →Mission Darkness BlockBox Touch - portable forensic RF enclosure
The Mission Darkness™ BlockBox Touch is a collapsible Faraday enclosure with a large interior space, built-in conductive glove and device preview. Designed specifically for law enforcement and military forensic investigators, the BlockBox Touch allows users to interrogate devices and access data at the point of seizure. The enclosure is easy to use, extremely high-shielding, and large enough to accommodate any size tablet or phone, plus accessories such as batteries or data extraction tools.
The BlockBox Touch side walls collapse, and the enclosure folds into a compact size and fits inside the included carrying case.
The Faraday chamber uses the patented NeoLok™ closure system, allowing an operator to effortlessly close the chamber by way of a double roll and strong neodymium magnetic seal holding the roll in place. A quick-snap strap over the roll provides extra security, which is especially useful if transporting shielded devices between locations, such as from the collection site to the lab. This type of closure is preferred for forensic use as the Faraday chamber can be easily opened with a glove. The magnetic closure increases the product’s overall longevity, compared to Faraday enclosures built with Velcro which can damage gloves and wear out with frequent use due to “hard pulling” on the closure area.
Serialised: Each BlockBox has a unique serial number for asset tracking and evidence chain-of-custody documentation.
Features:
- Wide opening accommodates any size tablet, cell phone, or similar size device
- Collapses into a compact size and comes with a slim carrying case to hold the analysis enclosure and accessories
- Devices remain fully shielded during transport
- Made in the USA
RF Isolation & Shielding:
- TitanRF™ Faraday Fabric is certified by Keystone Compliance to MIL STD 188-125 (shields against High-altitude Electromagnetic Pulses) and IEEE 299-2006 (effectiveness of electromagnetic shielding)
- Blocks all RF signals including WiFi (2.4 to 5GHz), Bluetooth, Cellular (including 5G), GPS, RFID, NFC, and radio signals from low MHz to 40GHz, with ~90dB+ average attenuation
- Blocks carrier, hardware, and OS agnostics
- Shields against EMP, HEMP, CME, Solar Flares
- Blocks device hacking, tracking, remote wiping and remote detonation
Included in The Kit:
- Mission Darkness BlockBox Touch
- Slim carrying case with a handle and two interior zipper pockets
- Removable signal-dampening foam block (for increased shielding in high-signal-strength environments, also serves as a platform for analyzing or taking photos of devices inside)
- Stylus
- Usage instructions
Construction:
- The exterior is constructed of water-resistant Ballistic nylon
- The interior has two layers of high-shielding TitanRF™ Faraday Fabric on all sides with dual paired seam construction
- Padded side walls
- Patented NeoLok™ closure system consisting of a double roll with a magnetic seal, plus additional quick-snap closure strap
- Built-in double layer conductive glove
- Large transparent viewing window
- Closable transparent pocket on back to place organisation information
- Signal-dampening foam block
Dimensions:
- The kit can be transported in a backpack
- Internal usable dimensions: 17″ L x 13″ W x 6″ H (43.2cm x 33cm x 15.2cm)
- Carrying case: 11″ L x 14″ W x 2″ H (27.9cm x 35.6cm x 5.1cm) when packed with collapsed product and accessories
Usage Warning: The Faraday fabric on the inside and the conductive gloves will become defective with extended water contact or any punctures – do not insert wet devices, or items with sharp edges inside the BlockBox. All Faraday fabrics wear out over time – the BlockBox and gloves should be regularly checked to ensure they continue to adequately shield.
If charging of devices is required, consider the BlockBox Touch USB which includes a USB filter and cable set.
Links to the videos on the BlockBox Touch are here:
For more information about Mission Darkness™ products, visit our brand page.
TitanRF™ Faraday Fabric is verified by Keystone Compliance to IEEE 299-2006 and MIL-STD-188-125
On-Site Digital Forensics & Triage
Law enforcement and military investigators use the BlockBox to examine, preview, and extract data from mobile devices directly at the scene. The shielded environment keeps devices entirely shielded from RF signals, preventing remote data wiping or device alteration.
Preventing Remote Data Wiping
Isolates devices so suspects cannot remotely trigger a "kill command" or wipe data.
Anti-Hacking & Anti-Spying
Ideal for executives, journalists, and government officials to safely view sensitive data in public without the risk of interception, malicious tracking, or remote microphone/camera activation.
EMP & CME Protection
Certified to both MIL-STD-188-125 and IEEE 299-2006 to provide robust protection from electromagnetic hazards (EMP, CME & Solar Flares), preventing damage to the sensitive microchips and circuits.
Device Testing & Signal Isolation
Hardware and security researchers use the pouch as a controlled, secure environment to test how devices perform when completely cut off from WiFi, Bluetooth, GPS, and cellular/5G networks.
Device Charging
Large enough interior to carry a separate power bank to keep devices charged from point of seizure to the lab.
